Access Point SNMP
Access Point SNMP is an easy to use utility to fully control and config Access Point via SNMP protocol.
cfgstoragemaker is a MRTG configuration file generator for storage monitoring via SNMP.
getsnmp is a scheduler for collecting SNMP values from any network equipment and storing these values in an rrdtool database.
Mbrowser is an SNMP MIB browser based on GTK and net-snmp.
(commercial) MIB Views is an entry-level SNMP management application providing an easy to use tabbed interface with several SNMP Tools. The tools are based partly on those bundled in MIB Smithy, with a more consolidated GUI and new features. The suite includes MIB Browser (Tree View), SNMP Query, Table View, SNMP Walk and Trap Watch tools, with more tools and plugin features in the works. MIB Views supports SNMPv1, SNMPv2c and SNMPv3 with MD5 and SHA authentication and DES encryption.
MRTG-eth-probe is a Perl script which provides a probe for the Multi Router Traffic Grapher to print statistics for network devices which do not support the SNMP protocol.
multiwalk2c is a multi-threaded SNMP scanner. It is a modified version of snmpbulkwalk. It can scan agents listed in special agents file, write to a single or many output files, and traverse different parts of a MIB tree in one thread.
Net-SNMP is various tools relating to the Simple Network Management Protocol including an extensible agent, an SNMP library, tools to request or set information from SNMP agents and more.
Netdisco is an Open Source web-based network management tool. Designed for moderate to large networks, configuration information and connection data for network devices are retrieved by SNMP. With Netdisco you can locate the switch port of an end-user system by IP or MAC address. Data is stored using a SQL database for scalability and speed.
onesixtyone is an efficient SNMP scanner which utilizes a sweep technique to achieve extreme performance. It is possible to scan a class B network (65536 ip addresses) in under 13 minutes with a very high degree of accuracy.
opensnmp is a multi-threaded development environment for C++ that implements SNMP 3. In particular, it is designed to match the architecture of the Internet Engineering Task Force SNMPv3 standard (RFCs 3410-15).
phpSNMP is an implementation of SNMP in pure PHP as an alternate to the UCDSNMP/NETSNMP extension. It returns MIB-independent data that should be a uniform format across platforms, and should be more thread-safe than the extension. It supports threadless parallel gets, walks, and sets for extremely fast (compared to sequential) polling of an entire network. Traps are supported.
qtmib is an easy-to-use SNMP MIB Browser based on QT4 library. It is build as a front-end for net-snmp, and it allows the user to query any SNMP enabled device. It implements SNMPv1 and SNMPv2c, and it is released under GPL v2 license.
Remote Arpwatch collects ARP tables from remote devices usin g SNMP and checks them for changes. It is very useful for det ecting problems and malicious users in networks with routers th at don't support static ARP tables.
SNMP Command Line Interface
SNMP Command Line Interface was written to address the need for small and efficient command line utilities to monitor and configure network devices and host systems.
SNMP Trap Translator
SNMP Trap Translator is a SNMP trap handler written in Perl for use with the NET-SNMP / UCD-SNMP snmptrapd program.
SnmpB is an SNMP MIB browser. It supports SNMPv1, SNMPv2c, and SNMPv3. SnmpB can browse, edit, load, and add MIB files and can query SNMP agents. It also supports agent discovery, trap events, and graph plotting.
WAP11GUI provides a Unix SNMP client you can use to configure a WAP11.