This is a device driver for the ImageNation Cortex I video capture card.
Cxdrv is a device driver for the CX100 frame grabber by ImageNation for ISA and PC/104 busses. On Linux-2.0 it works well, it has been ported to 2.2 but the code has not been tested after verifying that it compiles and loads.
The IVTV project develops a kernel driver for Linux and a driver for X11 for hardware based on Conexant's CX23415/CX23416 codec chip such as the Hauppauge PVR 150/250/350/500 models and other supported hardware.
for the full motion video capture/playback hardware motion JPEG board LML33
Matrox Meteor FrameGrabber Driver v1.4
a device driver, utility programs and programming examples for the Matrox Meteor frame grabber
A Linux device driver for the MuTech MV-1000 PCI-framegrabber.
Pxc is for the PXC200 frame grabber by ImageNation. It supports both the L and F variants of the board, as well as generic Bt848/849/878 devices. Version 0.80 and later support the PXC200A series (model L and F), based on the Bt878, as well.
Pxdrv is a device driver for the PX500/510/610 frame grabber by ImageNation. Linux-2.0 and 2.2 (port to 2.4 planned).
sn9c102 Video Grabber
captures and displays frames from an sn9c102-based Sonix/Microdia Webcam, using Video for Linux 2 and the sn9c102 USB driver. It also allows the user to upload the captured images by FTP
TechWell TW98 i2c
a driver for this video capture chipset used in a number of low end graphics card
Zoran (ZR36120) based framegrabbers
a Zoran driver which is based on a ZR36120 and SAA7110 framegrabber